Oil production efficiency and capacity of technical and economic indexes of machineoil, is the preferred conditions on product evaluation of user. Only meet the pressprocess conditions, and continuous press 24 hours (at least one shift), in order to achieve good economic benefit. Determine the oil efficiency and production capacity,technical and economic indicators, is the mean value refers to the continuous work.So, when pressed to stop or only crush tens of kilograms, hundreds of kilograms ofoil, not to have the good economic benefits, but also not as evaluation of evidence.
It should be pointed out, some users use the "oil rate" (that is, per 100 kg of oil can besqueezed out of several kilograms of fat) concept, this is not scientific argument. How much oil, process, and raw material oil and the rate is related to the mode ofoperation. As a stereotypical screw press, mainly to ensure the oil extraction efficiencyand residual oil rate.
1. the operator
The main reasons are the unskilled, operation skills are not high, don't abide by the rules; be negligent, poor quality consciousness operation; personnel does not close;the effective use of the low rate of equipment.
2.equipment
The new machine while the quality inspection of the factory, but after the storage,handling, transportation, may cause damage. Especially the installation of improper adjustment, assembly quality is poor, not in the correct use and maintenance of safety operation procedures, will enable the machine can not function. Man-made repaircomplex troubleshooting, accident, directly affect the product quality and production capacity. The opening of the new machine, derusting, must be carried out on the press bore running, try pressing, try to raise the pressing chamber temperature in formal pressing, keeping the feed - the cake.
High quality raw materials containing impurities, lower level, will directly affect the oilproduction efficiency and capacity. For the harvest, exposure, transportation and storage process, the impurity band into organic impurities (such as plant stems and leaves, husks, grass, hemp rope,
A piece of cloth, paper and all kinds of grain, inorganic impurities such as dust, dirt,gravel, tile, etc.) and oily impurity (pest grain, grain and oilseed not dissimilar metal impurities (such), nails, screws, etc.) shall be cleaned, screening the use of machinery and equipment, and according to the practical application of pretreatment processprocess.
4.Environmental Science
Processing environment, should meet the requirements of oil producing process.Prepare production tools and process the necessary (such as pre processing andreprocessing) equipment, to improve production efficiency, reduce the invalid labor,ensure the machining process
没有评论:
发表评论