Peanut oil press safety technology and maintenance

1 This machine uses 380 -volt electrical and mechanical power , heating and control system uses 220 -volt power supply , according to customer requirements, but also can be changed to 220 volt power supply.
(2) To ensure the safety of electrical systems must be grounded protective measures.
(3) The system is a high pressure corn grinder pressure of 55 MPa pressure levels overpressure is prohibited to use ! Prohibit unauthorized transfer chaos , chaotic demolition !
4 . The case of gauge ineffective or corrupt to be allowed to start production of the non- replacement of the gauge and then boot .
5 high-pressure machine during maintenance and packing machines are not allowed .
6 Please operate in strict accordance with the rules to use during operation.
7 must take after a good fry oil fumes drained gas eruption there would be squeezed poise , and in severe injury.
8 After the oil drained , they should immediately pellet mill machine , otherwise it will be too long gas erupted phenomenon .
9 If the sump blockage please clean up with a thin blade or needle scraping through
10 The new machine uses a hydraulic oil must be filtered month and replace the hydraulic oil clean and clean the tank once a year later . A long time do not use turn off the power.