2013年9月13日星期五

Normal operation oil press


So repeatedly, sustained more than 3 ~ 4h, the oil press temperature gradually increased, and even take smoke (which is Normal phenomenon). Start squeezing when pressing chamber temperature low, slow twist, withered section stud on the handle to increase the thickness of the cake, while increasing the moisture squeezed into billet Until the pressing chamber temperature. Rose to about 90 ℃, oil press after the normal operation,  machine for pellets  of the cake can be adjusted to 1.5 ~ 2.5mm, and tighten the fastening nut.
During operation should always check the oil press cake out of the situation and control the moisture billet is neither too high nor too low. Normally the cake should be flaky, by pressing screw Axis  oil equipment , the other side has a lot of hair pattern. If the cake loose weakness, or the cake shapeless, darker color, hand pinch Serve fragments, indicating billet Add water too.

没有评论:

发表评论