DME industry has broad development prospects

Ether and liquefied gas co-firing is used to resolve the remaining issues after, but mixed with liquefied DME Gas storage and liquefied petroleum gas application can not simply apply the standards,  machine for pellets  the use of mixed gas,Ensure that the gas mixture reliability, stability, once the market regulatory challenges crack, I believe mixed gas Promising prospects.
Despite the development of DME industry has broad prospects, but the cultivation of the market requires a certain process. Two
DME industry there are still many problems to be solved. Currently, the global credit crunch, making in
Stages of development of alternative energy industry suffering from temporary ills. Meanwhile,  oil equipment  as household fuel supporting Facilities imperfect, alternative diesel fuel standards and policies and regulations have not yet introduced, some industries Overcapacity and redundant construction, automotive marketing DME slow, and many other factors, but also makes the DME Application of in-depth development time needed.

Fuel oil storage resources

This is a quite imaginative interpretation, is clearly not as This enterprise was awarded the license does not include crude oil storage and export trade.
Commissioned by  oil refinery  Reserve Center organization using social capacity storage reservoir qualification tender country of 6 people Camps or local enterprises won the bid 1.5 million tons reserve indicator. When the main storage is to pay rent Gold party cooperation, the government signed a two-year lease contract with the enterprise, the monthly rent per cubic meter
Unified to 17 yuan. Etc.. These companies have fuel tanks resource capacity of nearly 1.5 million tons capacity left Right. Compared with the previous qualifications obtained storage, the Commerce Department issued a document obtained warehousing business cards Rear-added "business" word. But I consulted the Department of Commerce  oil expeller  Trade Cooperation Institute States International market research experts. The expert said that since the company is crude oil storage enterprises, and Warehouse license is issued, then the subsequent "management" refers to the word around the enterprise storage industry Works carried out business activities, including upstream and export trade should not, if included, then the Commerce Department Will clearly give a specific quotas.

Oil refineries refinery project belongs fuel type

Oil refineries refinery project belongs fuel type, producer five standard gasoline, diesel, aviation kerosene. That Burma oil and gas pipeline project is also an important supporting projects. Project is located in peaceful industrial park, Kunming
Ethnic village near the Dianchi Lake City 27.2 km. Currently the project has entered the main construction phase,  oil equipment  tank shape.
Oil outside discloses its 10 million tons / year refinery project environmental impact report and approval, but Beijing,
Kunming and many other environmental organizations found that the EIA report absolutely no public  oil refinery  chapter. In
After further study, the environmental organization called the project in the planning, site selection and other aspects of Zhu
Many irregularities.

Plastics and rubber is no longer a simple

Plastics and rubber is no longer a simple, everyday bottle, film, tires, etc., but more infiltrated into the high-precision.
Tip of products, and  machine for pellets  materials, such as high-precision instrument parts, auto parts, medical.
Therapy devices, and even oil exploration highly difficult job. The rapid development in all walks of life, the plastic.
Rubber increasingly showing its vital importance.
With the national focus on supporting the development of new materials industry, the encouragement of sustainable development policy and its implementation And stringent environmental policies, plastics and rubber in the national economy more and more important role in the development have been Become irreplaceable material. Plastics and rubber application has been involved in automotive, electronics, medical, Household appliances, building materials, packaging, printing,agriculture, water conservancy,  oil expeller  engineering, transportation, transport Lose, cosmetic, food, aerospace, apparel, stationery, furniture, gifts and other fields, And applications in these areas continue to expand. While in some new areas should get more Purposes. Currently plastics processing industry has become the country's largest industry, light industry, China has become the world The largest plastics production and consumption country.

Screw with pin

Average processing temperature as not more than 200 ° C, for extrusion processing , if there is a pin screw that kind of thing , the processing temperature needs to be further reduced ! For the hardness of Shore A60-80 flame retardant grade TPV, recommended injection molding temperatures from 170 ° C upwards beginning tune ; Shore A85-90 flame retardant grade TPV, from 180 ° C begin ! Extrusion processing ,  oil expeller  respectively, from 160 ° C and 170 ° C begins.
Flame Retardant TPV relatively more difficult coloring , usually our only should the white and black two kinds , if you need other colors , you need to customize ! But there is a direct customer's  oil refinery  , it can speed up the progress of the color , but pay attention to the following questions : a) do not directly use toner , unless the customer's own re- granulation ; b) Optional masterbatch to PE or PP as the base material , and requires very good flowability and lubricity , c) the amount of added masterbatch generally in the 3-5 % .

Ren Hong Kong TM Flame Retardant TPV drying before processing

Because tough TPV Port TM retardant containing about 30% of the flame retardant , so the process is different conventional TPV , the following aspects are to be noted :
Ren Hong Kong  machine for pellets  TPV drying before processing
To be dried before processing , dry conditions of 100 ° C / 2 hours, dried test is in place , you can view products and articles section apparent , if the apparent roughness and  oil equipment  in a cross section , then need to be further dried. At that time did not run out of flame-retardant TPV, you need to be sealed and stored , or when the next use still need to dry !

Continuous phase consisting of polypropylene

In a wide range of applications with the traditional rubber material , other TPE elastomers ( including TPR \ SBS, SEBS, TPU , etc. ) materials, such as plastic or PVC materials, the overall performance and overall cost alternatives all have
certain advantages , so as to products  machine for pellets  product innovation , improve value-added products , improve competitiveness provides a new choice.
Is ThermoplasticVulcanizate short, the Chinese name for the dynamically vulcanized thermoplastic elastomer EPDM EPDM dynamically vulcanized or thermoplastic rubber, is highly vulcanized EPDM rubber EPDM particles dispersed in a continuous phase consisting of polypropylene PP thermoplastic polymer
elastomer material. TPV room temperature physical properties and functions similar to thermoset rubber , high temperature performance properties of thermoplastics , can be quickly and economically and easily shape . Dynamically vulcanized EPDM TPV thermoplastic elastomer / rubber  oil refinery  rubber material by dynamically vulcanized EPDM EPDM rubber in less than 2 micron-
size particles dispersed in the plastic matrix of polypropylene PP , the rubber and plastic characteristics of a good the combined together to obtain comprehensive high -performance elastomer material .

Thermoplastic processing methods

1 , good flexibility and resistance to deformation , resistance to environmental aging resistance equivalent to EPDM rubber, while its oil and solvent resistance and universal neoprene.
2 , wide application  oil equipment  range (-60-150 ℃), hardness and wide application (25A-54D), easy to stain the advantages greatly improved product design freedom .
3 , excellent processing performance : Available injection, extrusion and other thermoplastic processing methods , efficient,  oil refinery , without additional equipment, high mobility , small shrinkage .
4, green , recyclable, and reusable six no significant decline in performance , compliance with EU environmental requirements.
5 , light weight ( 0.90-0.97 ) , the appearance of uniform quality , high-grade surface , feel good .

EPDM international supply in short supply

Specializing in thermoplastic vulcanizate (TPV), the high-speed rail industry, has won orders have to be stable with quality and competitive price. At present, because oil prices are high , EPDM international supply in short supply , causing the price of EPDM is almost close to 50,000 yuan per ton / ton , and the traders are confident that exceeded 50,000 yuan / ton, is at hand, so are determined not shipments.
How to deal with  oil expeller  problems in the previous news to talk about co- create the world's leading dynamic vulcanization technology, in the process, greatly reducing the cost of production of TPV . The cost of the raw materials to solve this problem , while the EPDM in particular under conditions of dynamic vulcanization TPV TPV can be kept consistent with previous performance. Currently used in the injection molding industry , has been  oil refinery  without any obstacles , and now in order to further the two sides in terms of melt fracture do further research to expect extrusion, blow molding areas have
more applications .

Ren Hong Kong TM thermoplastic elastomer

Full dynamically vulcanized thermoplastic elastomer (TPV) for  the commercial production , has been successfully applied to automobile parts, sealing products , wire and cable , hardware, cushion shock , plastics modification and other fields, and is showing with its broad market prospect. As the market to mature,
the U.S. special polymer subsequently launched a TPE series and TFM series , is currently  machine for pellets  manufacturers can provide the most complete varieties in one of the enterprises . Port TM tough thermoplastic elastomer vulcanized thermoset rubber, not only the typical performance , and it can be thermoplastic processing, such as injection molding, extrusion molding, blow molding . Port of TM and tough material back and can be reused. Port TM tough thermoplastic elastomers by a highly dispersed vulcanized EPDM rubber particles dispersed in a continuous phase composed of polypropylene . Polypropylenes
given the tough thermoplastic  oil equipment  TM port , given the dispersed rubber phase of rubber properties. Ren Hong Kong TM can supply grade from 55ShoreA to 50ShoreD, each grade has different performance , customers can according to their actual needs of products to pick the appropriate level.

Cylinder and piston oil overhaul

 Cylinder and piston oil overhaul, if they are installed the wrong cup sized up due to the correct way should be re-installed cups. Cup cracked the case of damage, replace New cup. Valve failure repair, if there is oil in the dirt so that the ball valve is not sealed,  machine for pellets  valve should be cleaned to remove dirt, so that the ball valve is closed. If the Is a spring loses its elasticity can not withstand high pressure, should be replaced with new springs. If an adjustment screw loose, resulting in less than the predetermined pressure valve on the jump, should be  oil refinery  screw So that when the pressure reaches a predetermined pressure jump valves. Overpressure in the case of regular jobs, resulting in ball valve bumps will be reground valves, replace the ball and Notes Intended to follow the rules and operation.

Insufficient pressure pump overhaul

No oil pump overhaul, if they are dirt clogged oil filter, oil filter should be washable. The case of the oil used for too long, because the sediment adhering to the inlet valve on the The resulting valve does not close together, should be replaced with a new release of oil or old  oil expeller  and clean the inlet valve. If an insufficient amount of oil in the tank, add enough oil to the tank can be,If the vacuum pump in the minors, you can pull out the small piston, and then injected into the oil pressure.
Inadequate maintenance of pump pressure, if there is dirt or poor sealing valve, be washable after grinding, so close together. If an inlet valve plug and oil press Seat poor contact can also be washable after grinding, so close together. If an oil press oil out of the valve plug and seat causing poor contact or tighten oil spills, Progress can grind oil press  oil equipment  plug and seat, so close together or tighten the plug. The case of the small piston and pump wear after the gap is too large, should be replaced with new pumps.

Feed particle diameter value

 Will be more finely crushed some feed ingredients, if you add the molasses or fat, or fat molasses should be improved uniformity and control the spread of the amount added in order to improve the density of pellets to prevent feed soft; c) adjusting cutter the distance from the surface of the ring mold,  oil equipment  outer edge surface of the ring mold from a distance not greater than the diameter of the particles produced by the feed value, or replace the use of relatively sharp cutting blade, the small diameter  oil refinery  particulate material may also be used, and to thin blade close to the surface of the ring mold production;
Use of adhesive class granulation aids, help to improve the binding force within the particles.

After compression ring die pellet

Improved methods in that: change the recipe, but this may increase the cost of raw materials; control quenched quality of the steam used to maximize the use of dry saturated steam than to make possible the added moisture is minimized; reduce productivity or increase the effective length of the die hole, as far as possible in the feed hole in the mold residence time is increased;  oil expeller  a binder also helps to reduce the incidence of vertical cracks.In some feed formulation containing  machine for pellets  and slightly flexible material, this material after quenching Cooditioner swelling when, after compression ring die pellet, it will effect the result of water and raw materials itself has flexible and bounce, resulting in vertical cracks.

oil tank explosion

Petrochemical refers to oil and natural gas as raw material, through physical, chemical and mechanical processing and preparation of various petrochemical products industry. It involves all areas of the national economy, is an important and indispensable national economy industries and pillar industries of the national economy in the  machine for pellets  occupies a very important position. Petrochemical industry complex production processes, equipment variety, is a more complex process, highly technical industries. As used in the production process of raw materials, semi-finished and finished products as well as a large variety of support materials are flammable and explosive substances, can easily lead to fires and explosions, and the fire is not easy when the fierce fire fight in the past 20 years, the world petrochemical industry very rapidly, which caused a major fire and explosion accidents have also continued. For example: in 1973 and 1974 occurred in Japan's oil conglomerate continuous fire and explosion accident not only caused heavy casualties and property losses, but also  oil refinery pollution of the surrounding waters. 1975 U.S. Ante Pu Belgian company Union Carbide factory produce 150,000 t of high-pressure polyethylene plant, due to a leakage of reactor filler lid, heat blast, chain reaction, the entire factory was destroyed. Occurred in Spain in 1978, due to super-suits and sun exposure resulting acrylic plant explosion killed more than 200 people once. 1982 Caracas near a large power plants oil tank exploded, killing 145 people were killed and 500 wounded, it suffered heavy casualties in the world oil tank fires are rare.

vegetable oil source for food production

Concerns about the industry, increased net imports of staple agricultural products, on the one hand to suppress the formation of the domestic industry, leading industry lacks the necessary incentives and motivation, on the other hand to the long-term security of supply of  oil equipment  products pose potential risks. Although the state increasing the minimum purchase price of grain and other agricultural products, but the policy has been largely supported effects cheap agricultural imports digestion.
From Resource Allocation, soybeans and  oil expeller  products under attack by adjusting the structure, freeing more resources for food production to reduce its real impact. However, net imports of staple agricultural products to expand the scope to increase net imports in the context of the limited scope for adjustment of agricultural structure, import prices of agricultural products inhibition and suppress a wide range, which will give the development of China's agricultural industry has brought unprecedented challenges.

Wider temperature used synthetic

Currently on the market of oil because of different base oils can be simply divided into two kinds of mineral oil and synthetic oil (vegetable oil production because it is not rare count). Synthetic oils are divided into: whole and into and semi-synthesis. Fully synthetic motor oil is the highest level.
Biggest difference between the two lies: the temperature of a wider use of synthetic oil,  oil expeller  period of use, as well as higher costs; same film requirements, low viscosity synthetic oil can be used to reach, and mineral oil to synthetic oil required with respect to thicker viscosity can achieve such a requirement. In the same working environment,  oil refinery  use of synthetic oil is much longer period than mineral oils, so the cost is higher, but after comparing oil changes are not much higher than mineral oil.

Vegetable oil imports continue to remain high

From the Department of Agriculture Agricultural Trade Promotion Center learned in recent years, soybeans, cotton, vegetable oil imports continue to remain high, sugar, dairy products, while net machine for pellets significantly, all three major food crops to net imports. Although food particularly rice and wheat net imports is very limited, but the 10 years of development and change, China's net imports of agricultural products into the bulk phase of the trend is clear. Data show that in 2012 net cereal imports 13,169,000 tons, wheat, corn, rice net imports reached 3.415 million tons, 5.153 million tons and 2.088 million tons; sugar and cotton import oil equipment 3.747 million tons and 5.413 million tons, and then highs. According to Commerce Department data released this week, June soybean imports forecast to Hong Kong 8,322,800 tons, a record monthly high.

Vegetable oil based inks global oil crisis

The rise stems from vegetable oil based inks occurred in 1979 global oil crisis, because when oil prices continue to soar, spread to include the printing industry, including related industries, the oil supply caused some problems, especially in the ink industry for the market supply problems even as sensitive. To ease the oil crisis impact on  oil equipment  industry, supply of raw materials to avoid affecting production. American Association of Newspaper Printing (now the Newspaper Association of America) to promote the development of the person in charge of promoting alternatives to oil matrix printing ink, after years of research on a variety of vegetable recipes test results show that soy ink non-toxic pollution, and cooking The soybean yield abundant, cheap, safe, reliable, good printing effect and  oil expeller  the standard printing inks, especially in environmental performance is superior.
Chose to soybean oil-based ink manufacturing plant, and in 1987 conducted a news print and succeed, so that the soy-based inks to be applied in the newspaper industry. It can be said, soy ink application devaluation newspaper industry.

more soy ink volume

Because soy ink may exhibit more intense and bright color effect, resulting in the printing industry can use less ink,  machine for pellets  and increased approximately 10% to 15% of the units print volume.
Deep color, rich and beautiful, can be adapted to a wide range of color printing.
Non-toxic: soy ink as free of aromatic polycyclic hydrocarbons and other organic volatile harmful ingredients that are non-toxic inks, environmentally friendly.
Resistance to laser resistance:  oil refinery  to laser resistance when printed when needed, soy ink is the best choice. Copier heating, not volatile and sticky on paper, will not pollute printer parts.

waste paper deinking paper fiber damage easily and less

Based on the findings, for the recycling of waste paper de-ink, soy ink is easier than ordinary ink inking, and less damage to the paper fibers. Meanwhile, after deinking waste ink residue than petroleum-based ink  oil refinery  decomposed (as soybean  oil expeller  biodegradable and non-petroleum-based biological decomposition of the material), is conducive to wastewater treatment operations. This characteristic of soy ink for paper recycling (recycled) job is a very favorable factor.

Crude oil market supply reduction

This year, the domestic price of imported materials and the formation of inversion become the norm. Import prices at a high one of the reasons is because the domestic petrochemical enterprises gross loss is more serious, thus controlling the amount of petrochemical reduce losses,  oil equipment  supply
reduction under the traders imported materials become the object of pursuit, creating widespread this year, a high level of imported materials phenomenon. In general, the imported materials in addition to domestic needs some special grades rely on imports, general domestic  machine for pellets  materials relative price advantage, but this year, an increase of domestic repair, coupled with cost-push, resulting in high prices of imported raw materials, so imports Manufacturers difficult to profit at all, compared to a loss before April the most serious
because of poor domestic demand, resulting in sharply lower domestic LLDPE prices, the current level of losses eased with the market upturn.

Squeeze out the oil to ensure the best results

As the seed material extruded continuously squeezing oil, virgin material particles in direct contact with each other and cause a pressure deformation of seed material, particularly in the  oil refinery rupture and the adhesive body. Such bombing bore after being squeezed, squeezed material is not a loose body to form a plastic body, called the cake. Squeeze due to the dual role of temperature and pressure,  machine for pellets  to deteriorate protein, thereby affecting virgin plastic material, in short, in order to ensure an appropriate level of protein denaturation best squeeze out the oil effect.

Old press law

Old press law requires the operator to pay heavy physical labor. While squeezing off greaves (cake), the residual oil content is very high, thereby wasting a very valuable oil resources. Modern industrialized compression method is automated operation, but a high content of residual oil greaves problem still not resolved. Pretreatment of  oil equipment  from the press to distinguish between cold pressing and hot pressing method, also called cooked pressing method. Cold-pressed is raw or roasted without steaming directly into the raw material oil press squeezed out of oil, this method is relatively shallow oil color, the color is more bright, but the oil is low, and  oil expeller  not taste strong, mellow . The cooked virgin oil crops in the press should elapse before drying, the purpose is to reduce the moisture content of raw materials, increased fat molecule activity and mobility, thereby improving oil yield, oil quality assurance fragrant taste. But also undermines the oil chemical tissue components, resulting in oil darker, more black.

The solution lies in improved pellet mill

This situation may occur. Such particles in the feed material is often squeeze ring pelletizing die hole, wherein the content ratio of the diameter of the fiber length, when the particle Is extruded, the result of swelling of the fiber material in the cross section of the particles produced across the crack, resulting in fir bark-like appearance.
Improved approach is to increase the ring  machine for pellets of raw materials, which increases the compression ratio of the ring mold; control the fiber grinding fineness, can not exceed the maximum length A third size; reduce productivity material through the die orifice to reduce the speed, increasing density; lengthened quenched time,  oil equipment  or kettle quenched Type conditioner; when moisture is too high or powder containing urea, it was also possible fir bark-like material appearance, should be controlled to add moisture and urea content.
 pellet produces a vertical crack
In some feed formulation containing fluffy and slightly flexible material, this material after quenching Cooditioner swelling when, after compression ring die pellet After due to the role of water and raw material itself has elasticity and bounce, resulting in vertical cracks.
Improvement lies in: Change formula, but doing so may increase the cost of raw materials; controlled quenching quality of the steam used, try to adopt a more saturated Dry steam, so as to minimize the added water; reduce productivity or increasing the effective length of the die hole, as the feed hole in the mold retention time Room increase; adding a binder also helps to reduce the incidence of vertical cracks.

Days Mania oil press

Small appliances Fair in China, Yun Tang tofu machine, days Mania press, tea, etc.  Food dehydrator  lung health and people's daily lives, products, allowing users to get rid of the traditional manual, a small can of energy efficient appliances completed, attracting buyers and media attention. These products is branded the "smart" and worth fold up, is currently in the major appliance stores are beginning to introduce, sales are good. Minor changes in the small office, which makes the original low-profit small appliances with new turn, manufacturers have benefited consumers to spend money to buy to improve the quality of life, why not? This year's small household appliance industry  oil expeller  to go from a "smart wind", on the one hand to get rid of the competitiveness of the problem of existence, two to derive profits also allow enterprises to have the capital long-term development.

Wet granulation is added to the liquid in the drug powder

Wet granulation is added to the liquid in the drug powder, binder, or bonding by adhesive bridging effect of the powder particles to coalesce and preparation methods. As a product of wet granulation with beautiful appearance, good mobility, strong abrasion resistance, good compression molding, etc., in the pharmaceutical industry's most widely used.
It is reported that,  Briquette machine  is a pharmaceutical unit operations are tableting during operation, a liquid or a binder solution is sprayed in the powder premix, the premix to improve mobility, compressibility, and content uniformity.
According to reports, the wet granulation the particles can have a good fluidity in drug delivery, packaging, filling, etc.  oil equipment , continuous, quantitative; prevent particle size, caused by differences in the density separation is beneficial uniform mixing of the various components; prevents dust flying during operation and adhesion to the walls, to avoid environmental pollution and loss of material.

Hydraulic press to maintain a reasonable pressure

1. Keep clean in the open before pressing and squeezing, you must pay attention to the clean surface of the piston, the piston surface adhesion of dirt and oil to be cleaned dry Net.  Briquette machine  pay attention to the hydraulic oil in the tank is clean, subject to careful when filling the tank filter. Use for some time, if found dirty oil should Timely release of filtration, or replace with new oil.
2. Use reasonable care to keep the pressure in the pump pressurized, do not rush too fast, to prevent damage to hydraulic oil shock. Reduce stress, must first open the oil Valve, when the oil tank back into the tank, you should open the valve slowly to avoid pressure suddenly drop. When using do not adjust to the pressure of the safety valve Meter readings 40 MPa (400 kg force / sq cm) or more, in order to avoid burst pipes or tanks appear. Non-random lengthened swing pump handle to prevent the Parts overload operation, not often make the jump valve safety valve to prevent the valve sleeve wear, fatigue and loss of elasticity of the spring, which results due to valve malfunction.
3. Attention to the timely maintenance of hydraulic press used in the operation, you should always pay attention to the operational status of the machine, for wearing parts (such as cups, seals,Ball, pistons, etc.) should pay attention to regular inspection and timely repair and replacement of loose nuts should be tightened, the machine should be  oil equipment  and cleaned. Liquid
Pressure oil press to stop using, you should wipe clean the machine overall, the site is easy to rust grease and oil paper or kraft paper bag, to prevent students
Rust.

pellet mill pellets exhibit many side bending and crack

This is generally in a particulate material produced when leaving the ring mold. In production, when the cutter position adjustment is too far away from the surface of the ring mold and blunt edge, the particle is  oil refinery  the die orifice is touched off cutter instead of being cut or torn, some particulate material bent point to one side and  machine for pellets  the exhibit many cracks. This pellet into cooler or during transport, often from these cracks at fracture, causing the production of excessive particulate material powder.

pellet mill operating current fluctuations

Conditioner spout cutting uneven, make  oil equipment  current fluctuations (Cooditioner blades need to be adjusted). Be sure to use the new ring mold preparation of a new roller, and configure certain proportion of sand bran grinding and polishing before use (to eliminate the use of inferior ring mold).
Strict control of time and temperature quenching, to keep the raw water into the machine, the raw material is too dry or too moist will cause the material is not normal, so granulators work correctly.
Steel structure is not solid,  oil expeller  pellet mill vibration, granulators easy to produce resonance (must be reinforced steel structure).
Conditioner tail did not produce or fixed is not strong shaking (required reinforcement).

Wet granulation is a pharmaceutical unit operations

Wet granulation is added to the liquid in the drug powder, binder, or bonding by adhesive bridging effect of the powder particles to coalesce and preparation methods. As a product of wet granulation with beautiful appearance, good mobility, strong abrasion resistance, good compression molding, etc., in the pharmaceutical industry's most widely used.
It is reported that, wet granulation is a pharmaceutical unit operations are tableting during operation, a liquid or a binder solution is sprayed in the powder premix, the premix to improve mobility,  oil processing , and content uniformity.
According to reports, the wet granulation the particles can have a good fluidity in drug delivery, packaging, filling, etc.  oil refinery , continuous, quantitative; prevent particle size, caused by differences in the density separation is beneficial uniform mixing of the various components; prevents dust flying during operation and adhesion to the walls, to avoid environmental pollution and loss of material.

grain and oil industrial exports brilliant foreign aid

Grain and oil machinery industry, but also created a brilliant oil industry export aid. With small hulling machine, milling machines and 200 oil press, represented by the product of thousands of  machine for pellets  as much as the total earned more than 26 million U.S. dollars. Where "East is Red" brand of food machine and the "Two Lions" brand hulling rubber rollers become Southeast Asia's best-selling product on the market. Commitments our government economic assistance to the Third World grain processing plant projects up to more than 30 of these countries and the region's political,  oil equipment  huge impact. One of the most representative, such as: assistance to Myanmar and Algeria rice mill, corn flour plant in Zambia aid, aid Guinea peanut oil plant, sunflower oil factory in Romania as well as aid assistance to Mali rice husk power plant project subsidiary, etc., This series of achievements are reflected Oil Machinery Industry generations staff for their hard work outcomes for the country to win the honor.

Oil Machinery Development Plan

Most of China's oil industry in a simple and primitive based workshops. In addition to Shanghai, Tianjin, Beijing, Guangzhou, Wuhan, Shenyang and other major cities, but most areas are ground with soil, soil and soil pressed grind grain and  oil processing , outdated equipment and backward technology, operating heavy production environment is poor, economic Technical indicators poor condition imaginable. There are a certain size, only a handful of decent processing enterprises, and these enterprises are mostly production equipment imported from abroad, the more serious is that the country is not a specialized production of grain and oil machinery and equipment manufacturing, which our great country and agricultural country status disproportionate. With the recovery of our national economy, especially in the first five-year plan period, China's grain and oil processing production increased rapidly, and a large number of grain and  oil equipment  enterprises with obsolete equipment, fell into disrepair, unable to undertake such a task, need to be updated transformation. In order to change this situation as soon as possible, then decided to establish 粮油机械厂 food department, the implementation of professional production, and then in 1958 in Qingdao City for the first time in summer grain and oil machinery working meeting was held to develop a food grain and oil machinery sector development plan, pull the conference On the construction of the National Grain and Oil Machinery Industry prologue. In October that year, that is, in the eastern outskirts of Beijing flour mill machine repair workshop, based on the establishment of the Beijing Food Machinery Factory; March the following year the State Council approved, in turn, Wuxi machinery factory owned heavy industries and chemical sectors belong rubber roller plant handed over to the Ministry of Food, merged subordinates food machinery factory in Wuxi, Shanghai also approved food grain and oil machinery factory was placed under the Ministry of Administration; 1964 in Zhengzhou, steel and oil depot construction project team, based on the expansion of the ministry of food Zhengzhou Grain Machinery Factory. Thus, the initial formation of the food sector own grain and oil machinery manufacturing backbone.

Grain and Oil Machinery Industry

Briquette machine and oil machinery industry, including rice, flour, oil, feed processing equipment manufacturing; grain storage, transportation equipment manufacturing; grain food processing and packaging, measurement, sales of equipment; grain laboratory testing equipment. Before the founding of New China, China's oil industry mostly simple and primitive based workshops. In addition to Shanghai, Tianjin, Beijing, Guangzhou, Wuhan, Shenyang and other major cities, but most areas are ground with soil, soil and soil pressed grind grain and oil processing, outdated equipment and  machine for pellets , operating heavy production environment is poor, economic Technical indicators poor condition imaginable. There are a certain size, only a handful of decent processing enterprises, and these enterprises are mostly production equipment imported from abroad, the more serious is that the country is not a specialized production of grain and oil machinery and equipment manufacturing, which our great country and agricultural country status disproportionate.  

Whether the excess refining capacity is

Whether the current domestic refining capacity surplus is becoming the focus of public controversy, China Petrochemical move, no doubt curious about the industry. "On the one hand Russia is rich in resources,  Oil processing government to encourage investment in downstream petrochemical projects we; hand Chinese market nitrile rubber (g City Rubber Factory's main products) external dependence is still great, this investment line with the company's long-term strategy." 6 There Sinopec headquarters sources said.
In fact, as early as 2011, China Petrochemical announced, the company will work with Saudi Aramco - the world's largest crude  oil expeller  in the Red Sea coast of Saudi Arabia Wang Guoyan joint venture construction of a Buenos Aires City refinery.
Sinopec have pointed out above, the domestic refining capacity has been faced with overcapacity, as soon as possible to seize the Middle East market, no doubt the company's long-term development.

NBR oil resistance strong

Production chain including natural gas processing, monomers, plastics, rubber, mineral fertilizers, tires and industrial rubber products, and plastics processing. As of June 30, 2012, it owns and operates in Russia, 27 production sites and employs close to 31,800 people, naturally, is China the ideal partner
for oil prices. 2012, China's  Food dehydrator  and SIBUR signed a framework agreement for the acquisition of gram City Rubber Factory 25% stake + 1 share agreement, and in the implementation of a series of details, completed the acquisition. China
Petrochemical, said the establishment of the joint venture, the two sides discussed the existing shareholders will likely nitrile rubber plant from 42,500 tons / year expansion to 5.6 million tons / year. It is understood that due to oil-resistant nitrile rubber strong physical and mechanical properties, are
widely used in automotive, aerospace, oil exploration, petrochemicals, textiles, wire and cable, printing and food packaging and other fields. As the domestic supply should not be a serious  oil equipment , so external dependence has been high.
Previously disclosed information, in addition to this the city of Krasnoyarsk rubber plant will be expanded, the two sides also plan to 50,000 tons per year in Shanghai, China New nitrile rubber facility; however, when the specific implementation of this plan, China Sinopec did not disclose terms.

China Sinopec executives expected

Back in China Sinopec executives expected, however, pressure to perform and the "security for" under the pressure of social responsibility, has not been relaxed refining capacity investment progress. At the same time, "but also from a global
strategic perspective, actively looking for investment opportunities in the international market."  Briquette machine  official said.
2010 Total announced its withdrawal from the joint venture with Saudi Aramco Yanbu refinery project shortly after the Chinese Sinopec announced over the project, the joint venture with Saudi Arabia, to continue to build the project.
It is understood that the Yanbu refinery project in the Middle East in recent years, one of the largest oil refining projects, daily crude oil processing capacity of 400,000 barrels (annual production of about 20 million tons). Once the project is put into production, not only to meet domestic demand for refined
oil Saudi Arabia, but also cover other Middle Eastern oil market, has been a multinational oil giants in the eyes of "fat."
According to the 2011 Memorandum of  machine for pellets  signed by both sides, China's Sinopec will hold a 37.5% equity interest in the project, Saudi Aramco holds the remaining 62.5% stake.
"In the past three oil central enterprises are eyeing the domestic market, but with excess capacity, market competition will become increasingly intensified, they have begun to plan how to build their own international trade channels and network layout, the future of China's oil industry will focus on
overseas investment Eventually, the whole industry chain upstream distributed evenly to change. "transnational investment bank analyst said.

FD-95 twin-screw extrusion granulation machine Features

Twin-screw plastic extrusion granulation machine - advanced large 160 pairs screw granulation of waste plastics aqueous base integration of production equipment. Using the German core technology, with low speed,  Oil processing , low energy consumption, no water pressure from the dry, drying, large diameter, feeding fast, long life and other significant advantages.
The machine screw and Simplified adopt modular design principle, the screw shape, simplified structure, aspect ratio, feeding and exhaust the number of locations, for network and pelletizing method, electric meter control mode Dengjun material system and process requirements optimize the allocation and adjustment, the implementation of multi-function, multi-purpose and characteristics of the unity both dedicated, high productivity,  oil refinery  consumption characteristics than that.
Twin-screw extruder features: homogeneous, plastic coloring, filling modification, enhancement, recovery and granulation.

uses 135 plastic granules machine

Mainly used for processing waste plastic film (industrial packaging film, agricultural film, greenhouse film, beer bags, handbags, bags, agricultural convenient bags, pots, buckets, bottles, furniture, daily necessities, etc.,suitable for most common waste plastics).  Food dehydrator  recycling industry is the most versatile and most widely used, most users welcomed the plastics recycling processing machinery.
Second, the characteristics
1, all the sorting and recycling of plastic broken through without drying or drying after washing, drying, can produce, wet or dry.
2, from raw material crushing, washing, feeding into granules are automated.
3, full use of high temperature friction and  machine for pellets , automatic heat production, to avoid the continuous heating, energy saving.
4, electromechanical dissociation, the operation easier, safer to use.
5, the screw cylinder are made of high strength quality carbon structural steel, durable.
6, the machine elegant appearance. Paint color according to customer requirements.

Plastic granules machine 135 main and sub-machine Luxury

Luxury plastic granules machine equipment plastic granules machine plastic granulator plastic recycling granulator machine plastic granules plastic granules  Briquette machine  offer waste plastic granules machine Plastic Extruder plastic granulator machinery San Xin plastic granules plastic granules machine wholesale various regions Supply special plastic water bottle  oil refinery  pellet machine woven plastic particles primary and secondary units
Overview: white pollution is worsening, waste plastics are everywhere, not only a waste of resources, but also serious pollution of the environment
Waste plastics recycling provides us with a broad investment profits, the first step will bring us good returns, never saturated market, allowing you to maximize investment returns.
Plastics recycling particles equipment by more and more customers, the use of mechanical recycling granulation of waste plastics recycling is developing a new way.

Plastic Pelletizing Line

The machine with different screw design is suitable for rigid PVC, Oil processing, PVC waste material recycling granulation processing equipment.
In the production process, it has a non-stop machine, pneumatic screen
changers, strong wind blowing, adjustable stainless steel hopper and can be
extruded at high speed for a long time stable. In the granulation unit
systems, the company also developed a waste film recycling machine, the
unit output is high, a thin film manufacturers the necessary equipment.
Plastic  oil refinery  This machine with different screw design is
suitable for rigid PVC, soft PVC, PVC waste material recycling granulation
processing equipment.

Picture granulator

Pellet mill granulator used for a variety of plastic film, sheet, fiber and
non-woven fabrics and other recycling, extrusion granulation. 1 feed
system: Optional forced feeding system,  oil refinery  maximum performance
and stability of the motor load. 2 Extruder: using high quality materials,
hardened high torque gear box, to ensure smooth operation, low noise. With
special screw and exhaust design, with high capacity, low energy
consumption characteristics. 3. Changer Filters: Multiple forms Hydraulic
single / dual stage and dual channel non-stop changer. Designed for
different customer needs and design, convenient for network mode, personnel
costs low. 4 brace Die: interchangeable die lip and yield depending on raw
materials, can be quickly replaced extruded plastic head count, to ensure
high-quality plastic material extrusion.

parallel twin-screw features

parallel twin-screw features:
 WPC material handling device consists of deep grooves, large pitch,
large volume, uncompressed structure twin screw and barrel metal alloy
composition;  Oil machine  port on the increase, according to the
material requirements of any combination of technology, wide adaptability
 Wood pelletizer die:
    Die mold steel and high-quality branded plated handle, reasonable
distribution of stream crossings, to ensure a uniform particle
independently of each extrusion, with the precision cutter ensures smooth
section, frequency control is  oil expeller  to the different granulation
requirements.
 Cooling System:
    Unique three-dimensional cooling structure, combining multiple
powerful new cooling fan, the cooling effect is more. High production
efficiency, low energy consumption, especially for the processing of wood
pelletizing.

PE WPC granulator

PE WPC flat double granulator, WPC wood plastic granulating machine is used
to produce wood pellets PE equipment, Food dehydrator  plastic granulator ※ PE
flat double granulator ※ WPC wood plastic granulator has high yield, good
plasticization, full particles and so on. ※ PE PE WPC wood plastic
granulator granulator flat ※ WPC WPC double granulating machine is mainly
used for PP, PE, PVC material or used new materials and wood and other
chemical additives mixing  oil equipment , the production of grain uniform,
dense, the production line has the following characteristics:
※ PE PE WPC wood plastic granulator granulator ※ WPC parallel twin wood
pelletizer equipment consists of:
    WPC system consists of parallel twin-screw extruder granulation,
granulation head, pelletizer, three air delivery components.

plastic granules machine 125 Standalone Features

1, all the sorting and recycling of plastic broken through without
drying or drying after washing,  Briquette machine , can produce, wet or dry.
2, from raw material crushing, washing, feeding into granules are
automated.
3, full use of high temperature friction and continuous, automatic
heat production, to avoid the continuous heating, energy saving.
4, electromechanical dissociation,  oil processing , safer to
use.
5, the screw cylinder are made of high strength quality carbon
structural steel, durable.
6, the machine elegant appearance. Paint color according to
customer requirements.

Plastic granules machine 125 Standalone

White pollution is worsening, waste plastics are everywhere, not only a
waste of resources, but also serious environmental pollution of Oil processing
plastics recycling provides us with a broad investment profits, the first
step will bring us good returns, never saturated market, allowing you to
maximize investment returns. Plastics recycling particles equipment by more
and more customers, the use of mechanical  machine for pellets  of waste
plastics recycling is developing a new way.
Mainly used for processing waste plastic film (industrial packaging film,
agricultural film, greenhouse film, beer bags, handbags, etc.), bags,
agricultural convenient bags, pots, buckets, bottles, furniture, daily
necessities, etc., applicable to most common waste plastics, waste plastic
recycling industry is the most versatile and most widely used, most users
welcomed the plastics recycling processing machinery.